Asus Z801 - Manual (Page 68)

64
NOte:
•
Plug the earphone to your handset before recording.
• The scheduled recording does not start in USB mass
storage mode.
To schedule FM recordings:
1. From the main menu, select Organizer >
Schedule FM Record. You can make up
to four recordings. Press edit to set.
2. Use the up/down navigation key to
highlight a field to set. You can choose
to turn the function on/off, set the date/
time to start recording, choose the repeat
mode (Once, Everyday, Days, Weekly,
Monthly), and choose which FM channel
you would like to record.
Stopwatch
The phone includes a stopwatch function.
There are two styles of stopwatch to choose
from: Typical or nWay.
The Typical stopwatch is a simple timer that can
be started and stopped using the OK button.
The nWay stopwatch consists of four
simultaneous timers that can be started by
pressing the up, down, left, or right navigaiton
keys. Only one timer can run at any time. The
total time appears in the middle of the screen.
To use the stopwatches:
1. From the main menu, select Organizer >
Stopwatch.
The Stopwatch menu screen is
displayed.
2. Select the type of stopwatch you want to
use and press OK to confirm.
3. Press the enter key to Start/Stop timing.
4. Select Reset to reset the stopwatch.
5. Select Back to exit. A message asks if
you would like to save the timing. Select
Yes or No.
6. If you select Yes to save the timing, enter
a name for the file. After entering a file
name, select Options > Done to save
the file.
typical stopwatch functions
If you select the Typical stopwatch, you are then
prompted to select one of three functions: Split
Timing, Lap Timing, or Record.
Split timing can time portions within a main
recording.
To enter a split time:
1. Press the left soft key to select Mark.
The current time elapsed then appears
in a list of times, while the stopwatch
continues to run.
2. Select Mark again to add another split
time to the list.
The Lap Timer, like the Split Timer, records
portions, or laps, of a main timing. The Split
Timer, however, displays cumulative time
elapsed, whereas the lap timer displays
individual lap times.