Asus Z801 - Manual (Page 22)

18
Answering a call
When you receive a call, the phone alerts
you by sounding the ring tone and vibration
according to the specified ring tone and
vibration settings. To answer the call, do the
following:
1. Flip open the phone to answer the call.
2. Press the power/end
key to end the
call and disconnect.
You may also select Options > Answer to
answer the call.
Answer mode
The default setting for the handset is to answer
when you flip open the phone. However, you
can also set the phone to pick up by pressing
any key. To answer a call by pressing any
key, select Profiles from the main menu, then
choose the profile setting you want.
For example, select Normal, then choose
Options > Personalize > Answer Mode >
Any Key. Press the enter key to check the Any
Key option. The left soft key
The left soft key is just under the
word Save on the lower left screen; select this
key to enable the setting.
to enable the setting.
Calls
Making a call
To place a call:
1. Enter the number you want to dial using
the keypad. If you make a mistake, select
Clear to delete at any time. The right soft
key is just under the word Clear on the
lower right screen; select this key to clear
a number.
To cancel the call and return to standby
mode, press the power/end
key.
2. Press the call key to connect the
call after you finish dialing the number.
To enable the loudspeaker, select H-Free
on the lower right corner of the screen by
pressing the right soft key .
3. Press the power/end key to
disconnect the call.
Making international calls
To make an international call:
1. Enter a + by holding down the * key.
2. Enter the international access code for
the country you want to dial, followed by
the area code and the telephone number.