Asus Motherboard - Manual (Page 12)

ASUS Motherboard installation guide 11
English
2. Install the standoffs to the matched
screw holes on the metal plate.
3. The I/O shield edge springs may
damage the I/O ports. Be cautious
when installing the I/O shield.
4. Position the I/O side of the
motherboard toward the rear of the
chassis and place the motherboard
into the chassis.
5. Insert and loosely tighten each
screw in a diagonal sequence first.
After all the screws have been
inserted, drive the screws until
they are finger-tight.
• You may remove the metal slot covers for the expansion cards at the back
of the chassis before installing the motherboard. For some chassis models,
it might be difficult to remove the expansion slot cover after the installation.
• DO NOT over-tighten the screws. Doing so may damage the motherboard.