Asus SP98-N - Manual (Page 95)

ASUS SP98-N User’s Manual 95
6. SOFTWARE REFERENCE
OS/2 V3.0 W
arp
6. S/W REFERENCE
6.10 OS/2 V3.0 (Warp)
6.10.1 Driver Files
The enclosed SiS 5597/5598 OS/2 3.0 driver contains the following files:
SISINST.CMD SiS driver install program
SVGA.EXE SiS PMI Generator
S768256.DL@ SiS IBMDEV32.DLL Display Driver
OTHERS other files required during installation
6.10.2 Installation
Before install SiS 5597/5598 OS/2 drivers, make sure:
1. Install your OS/2 system using “VGA display” option (i.e. standard VGA).
2. Start your OS/2 system.
Install SiS 5597/5598 OS/2 Warp drivers as following procedures:
1. Enter “OS/2 window” or “OS/2 full screen”.
2. Change to the directory where the SiS 5597/5598 OS/2 3.0 display drivers are
located and type SISINST .
For example, A:\OS2\SBCS.30>SISINST
3. All the Driver Files will be copied to a subdirectory C:\SISDRV and the
“Select Screen parameters for SiS SVGA” menu appears and all the resolution
(and color) and frame rate supported would be shown on the screen.
4. Choose which one you would like to use and click OK.
5. Then installation program would then complete all installation process and
create a “SiS Setup” for future change mode usage.
6. Shutdown and reboot OS/2 (your settings will only take effect when you reboot
OS/2).