beautypg.com

Software reference, 4 video operations – Asus SP98-N User Manual

Page 84

background image

ASUS SP98-N User’s Manual

84

Windows 3.1

6. S/W REFERENCE

6. SOFTWARE REFERENCE

(3) You must first zoom-in before you can zoom-out, that is, you cannot zoom out

to a resolution larger than what you initially set or defined.

To use this feature, do the following:

1. In the SiS VGA Configuration System box, click the Zooming button to open

the Zooming Hotkey dialog box.

2. In the Zooming Hotkey box, click the hot key/s you would like to use for ZoomIn

and ZoomOut. Click OK after completing your selections.

3. After completing setup, you may use the hot key/s you defined to zoom-in or

zoom-out.

6.4.4 Video Operations

6.4.4.1 DCI Function

SiS 5597/5598 supports the Display Contro Interface (DCI) software interface stan-
dard for software MPEG playback and other media player programs that can take
advantage of DCI.

The SiS 5597/5598 DCI driver is automatically loaded during the driver installation
and therefore, should be transparent to the end-user.

6.4.4.2 SiS MMPlay (SW MPEG)

To make SW MPEG playback more user-friendly than the original SW MPEG player
supplier provided, SiS provides an MMPlayer application program with a VCP-like
(Video Cassette Player) interface.

To take advantage of the SiS MMPlayer, you must first install “SW MPEG Player”.
All the SiS provided is just an interface but not a SW MPEG Player at present. If the
SW MPEG Player does not exist, the SiS MMPlayer will not work. (Xing or
Mediamatics SW MPEG Player supported)

To use the SiS MMPlayer, do the following procedures:

1. In the SiS Multimedia Vx.xx program group, double-click the Sis MMPlayer

icon. The SiS MMPlayer VCP-like icon appears.

2. The SW MPEG playback is now ready for your use.