Asus SP98-N - Manual (Page 33)

ASUS SP98-N User’s Manual 33
3. HARDWARE SETUP
Connectors
3. H/W SETUP
3.8.3 Riser Card Connectors
1) LAN Activity Connectors
These connectors support Local Area Network (LAN) cards such as the ASUS
PCI-L101 (see 7.1 ASUS PCI-L101 Fast Ethernet Card) with output signals
for data transfer activity. The LAN_LED connector allows the front panel LED
to flash during transfer activity between the network and the computer. The
WOL_CON connector allows the system to power up when there is a wakeup
package (signal) received from the network.
IMPORTANT: This feature requires that Wake On LAN is set to Enabled (see
4.5.1 Power Up Control) and that your system has an NLX power supply with at
least 720mA +5V standby power.
LAN Activity Connectors
+5 Volt Standby
PME
Ground
® NLX-R
YEONG-YANG
NLX-R (Front)
Yeong-Yang (Front)
NLX-R & Yeong-Yang Risers
+
WOL_CON
LAN_LED
(NLX-R only)
2) Front Panel Microphone Connector
This connector is used to connect the front panel microphone jack to the moth-
erboard through a ribbon cable.
Front Panel Microphone Jack
The front panel’s 1/8” microphone
jack connects to the riser card
through a ribbon cable
® NLX-R
YEONG-YANG
NLX-R (Front)
Yeong-Yang (Front)