Asus SP98-N - Manual (Page 20)

20 ASUS SP98-N User’s Manual
3. HARDWARE SETUP
Jumpers
3. H/W SETUP
5. Voltage Regulator Output Selection (VID0, VID1, VID2, VID3)
These jumpers set the voltage supplied to the CPU.
WARNING! Because CPU designs change rapidly, the table below is only in-
tended as a simple guideline and thus may not be true for your CPU. Always
refer to the CPU documentation for your CPU’s voltage and then set the appro-
priate VID jumpers according to the illustration below.
SP98-N Voltage Regulator Output Selection
R
VID2 VID3 VID1
2.1 Volts
VID0 VID2 VID3 VID1
2.2 Volts
VID0 VID2 VID3 VID1
2.3 Volts
VID0 VID2 VID3 VID1
2.5 Volts
VID0
3
2
1
VID2 VID3 VID1
2.7 Volts
VID0
2.8 Volts 2.9 Volts 3.0 Volts 3.1 Volts
3
2
1
3.2 Volts
3.3 Volts 3.4 Volts 3.5 Volts
3
2
1
Manufacturer CPU Type Single Plane Dual Plane VID0 VID1 VID2 VID3
AMD (.25micron) K6-2/266,300,333, ---- 2.2V(Dual) [2-3] [1-2] [2-3] [2-3]
350,366,380,400
K6/233,266,300
AMD K5 3.5V(VRE) ---- [1-2] [1-2] [1-2] [1-2]
IBM/Cyrix 6x86 3.5V(VRE) ---- [1-2] [1-2] [1-2] [1-2]
Intel P54C/P54CS 3.5V(VRE) ---- [1-2] [1-2] [1-2] [1-2]
AMD K5 3.4V(STD) ---- [2-3] [1-2] [1-2] [1-2]
Intel P54C/P54CS 3.4V(STD) --- [2-3] [1-2] [1-2] [1-2]
AMD (.35micron) K6/233 ---- 3.2V(Dual) [2-3] [2-3] [1-2] [1-2]
AMD (.35micron) K6/166,200 ---- 2.9V(Dual) [1-2] [2-3] [2-3] [1-2]
IBM/Cyrix 6x86MX ---- 2.9V(Dual) [1-2] [2-3] [2-3] [1-2]
AMD (.35micron) K6/166,200 ---- 2.9V(Dual) [1-2] [2-3] [2-3] [1-2]
Intel P55C-MMX ---- 2.8V(Dual) [2-3] [2-3] [2-3] [1-2]