Asus SP98-N - Manual (Page 90)

ASUS SP98-N User’s Manual 90
Auto
desk ADI
4.2
6. S/W REFERENCE
6. SOFTWARE REFERENCE
6.8 Autodesk ADI 4.2 -Protected Mode
6.8.1 General Description
6.8.1.1 Driver Files
1. The enclosed SiS 5597/5598 ADI driver contains the following file:
RCPSIS.EXP SiS ADI Driver (for all resolutions & colors)
Note: This version of ADI driver does not support 16-color operation.
2. This driver is compatible with some Autodesk Inc. products including:
(1) AutoCAD/386 R11
(2) AutoCAD/386 R12
(3) AutoShade/386 V2.0
(4) 3D Studio V3.0
3. The installation procedures are different from one program to the other. Only
the first step of the installation is the same for all these programs, that is, section
6.8.1.2 Unpack & Copy. Therefore, we will state this step below.
4. As to the installation procedures for each program, see sections 6.8.2—6.8.5.
6.8.1.2 Unpack & Copy
To unpack and copy drivers to where they should reside, do the following:
1. Run “INSTDRV.EXE” where it resides.
2. In “SiS Super VGA Drivers Installation” menu, select “A. ADI 4.2” to unpack
and copy drivers. (To select, type “A”)
3. In “Unpack & Copy ADI 4.2 Drivers” screen, keyin the “drive:\directory”
where these drivers would reside (default C:\ADI42). Program would unpack
& copy all related driver files to where you assign.
4. After “unpack and copy” is completed, exit the INSTDRV.EXE program.
5. Refer to sections 6.8.2—6.8.5 for detailed installation procedures of each program.