GE Industrial Solutions HE300GEN150 - Manual (Page 21)

PAGE 22 13 APR 2000 MAN0373-01
CH.4
This is a representation of the Genius LAN, with each device shown as a "block". Because only eight
devices can be shown on the screen at once, the screen "wraps around" from left to right. The left and
right cursor keys are used to select the device to be configured. When the desired block is highlighted,
the type of Genius device can be selected using the function keys. The AF-300 is configured as a
"Generic Genius I/O Device". This device is selected by pressing the "Other" (F7) function key, and
selecting the "Generic I/O" device from the devices listed.
Figure 4.2 – Generic I/O Device Configuration Screen
Below, each configuration parameter is described. The proper setting for a drive with a default data
configuration is also listed. Figure 4.3 lists the default drive data configuration.
%AI Length (Default = 6)
The number of %AIs assigned to the AF-300 drive should be equal to the number of global data words
broadcast by the drive.
%AQ Length (Default = 1)
The number of %AQs assigned to the AF-300 drive should be equal to the number of directed control
words.