GE Industrial Solutions LP 33 Series 50 & 60 kVA Installation Guide - Manual (Page 18)

Modifications reserved Page 18/42
OPM_LPS_3UI_50K_60K_0US_V010.doc Installation Guide LP 33 Series 50-60 kVA
Positioning of the UPS cabinet
Fig. 3.4-5 Bolts for the regulation of the cabinet
LP 33 Series is equipped with wheels for
easy placement of the UPS.
To make the UPS movable on wheels, the
bolts on each leg of the cabinet have to be
turned counter-clockwise, until they are
free from the floor and thus the cabinet
supported on wheels.
After having positioned the UPS at its final
location, the cabinet has to be secured by
rotating the bolts on each leg clockwise,
but the wheels must still touch the floor.
In case of parallel system, try to place
the UPS modules in sequence of their
numbers (marked on the packing).
If the units are positioned “side by side”,
the side panels must be mounted on all
units.
Fig. 3.4-6 RPA system disposition