GE Industrial Solutions EntelliGuard R AKD-6 - Manual (Page 26)

25 EntelliGuard R Circuit Breaker Retrofill AKD-6 Installation Manual DEH-41548 02/12
Install Neutral Rogowski Current Transformer (Breaker)
Figure 16 shows an exploded view of the breaker side neutral disconnect assembly for the AKD-6
AKR30/30H/50/50H retrofils. These will be available preinstalled and wired from the factory.
Figure 16. Neutral Disconnect Assembly for the AKD-6 AKR30H\50H Retrofill
AKR AKD6 BREAKER SIDE: P/N 10105292G1 COMPARTMENT: P/N 10108266G1
19-Pin Programmer Secondary Disconnect (Breaker)
The 19-pin programmer disconnects can now be included with the AKD-6 series retrofills to accommodate the
extended features of the EntelliGuard Trip Unit. The 19-pin programmer-disconnect assemblies already come pre-
installed and wired from the factory and do not require any installation in the field.
The compartment side is installed and wired in the field by a qualified electrician or installation service company.
Figure 17 shows the 19-pin programmer-disconnect on the AKR30/50, bottom side of the breaker, already
installed. Figure 18 displays the wiring diagram for the programmer-disconnect (12-pin and 19-pin combined in
one diagram, although the AKD-6 does not use the 12-pin). Figure 19 features an exploded view of the 19-pin
programmer disconnect. An installed view of the 19-pin programmer disconnect appears in Figure 20. For the
compartment side, the 19-pin is ordered separately and comes in a box. Below are the part numbers for the
breaker and compartment 19-pin programmer-disconnect assemblies.
BREAKER SIDE P/N 10107108G1 19-PIN PROGRAMMER DISC ASSY AKD6
COMPARTMENT SIDE P/N 10106652G1 19-PIN PROGRAMMER DISC ASSY AKD6