GE Industrial Solutions AF-600 FP OPCMBTCP Modbus TCP Option - Manual (Page 41)

6.2.1 Modbus TCP
EN-40 MODBUS TCP Status
Range: Function:
[0]
[1]
Read only. Displays the Modbus TCP- specific 16-bit Status word.
Bit Description Bit = [0] Bit =[1]
0 Link Status port
1 Disconnected Connected
1 Link Status port
2 Disconnected Connected
2 Link speed 0/10 Mbps 100 Mbps
3 Link Duplex Half Full
4 Port 502 com-
munication No Yes
5 UNUSED - -
6 Valid IP address No Yes
7 Modbus time-
out (30 s) No Yes
8 Duplicate IP No Yes
9 Register 7 error No Yes
10 FTP server Disabled Enabled
11 HTTP server Disabled Enabled
12 SMTP service Disabled Enabled
13 Cable diagnosis Disabled Enabled
14 Auto crossover Disabled Enabled
15 IGMP snooping Disabled Enabled
EN-41 Slave Message Count
Option: Function:
Read only.
Displays the number of Modbus messages received and processed by the slave.
EN-42 Slave Exception
Option: Function:
Read only.
Displays the number of Modbus messages for which the slave has sent an exception response.
EN-80 FTP Server
Option: Function:
[0] * Disable Disables the built-in FTP server.
[1] Enable Enables the built-in FTP server.
EN-81 HTTP Server
Option: Function:
[0] * Disable Disables the build-in HTTP (web) server.
[1] Enable Enables the build-in HTTP (web) server.
Modbus TCP
40
6