Theatre Solution Jury Base Seating - Manual (Page 39)

38 Installation Instructions Lecture Seating
Lecture Seating Maintenance Instructions
All Lecture Seating components are designed and built for years of reliable service. The durability and beauty of the
seating and tables will however, be greatly enhanced with proper care and inspection, as described below. Each project
will be provided with an Operations and Maintenance (O&M) Manual which will describe in detail the maintenance
measures to be taken by onsite personnel. For more information on the care of the veneer and fabric components of your
product, please refer to the Finishes section of the Theatre Solutions binder.
Preventative Maintenance
Inspection and Cleaning
In the first year after the original installation, it is recommended that the Seat/Table Supports be inspected
quarterly to insure that they remain secure to the floor, and that the chairs remain tight to the swing arms. After
the first year, this inspection interval can become longer, but should never exceed 6 months.
Lubrication
There are no components in the Lecture Seating product which require lubrication.
Periodic Readjustment
Besides inspecting for loose screw attachments, there should not be any routine need for readjustment. If,
however, a loose connection is discovered, please refer to the appropriate drawing and instructions for installing
the subject component. These drawings and instructions can be found in the O&M Manual.
Corrective Maintenance
All Lecture Seating components have been designed and tested to achieve optimum performance and durability. In
general, onsite maintenance personnel can provide the appropriate service to correct problems if they have the necessary
spare parts and installation instructions.
Troubleshooting
In the event that a problem with the performance or finish of the Lecture Seating product occurs, it is often
possible for immediate on-site remedies. TSI recommends that any loose component should be inspected for
any visible evidence of breakage. If evidence is found, the part should be immediately replaced. If there is no
evidence of breakage, the attachment hardware should be checked to insure tightness.
Obtaining Replacement Parts
A complete list of spare parts provided with the original installation is included in the O&M Manual. If any
additional parts are required, simply contact Theatre Solutions and refer to the appropriate part number or the
description listed in a drawing depicting the component.
Service Calls
For service work which cannot be executed by building user, contact Theatre Solutions and we will assist in
arranging for a visit by qualified technicians.
Shipping Back to Theatre Solutions
Prior to returning any component part(s) to Theatre Solutions, please contact us by phone or fax for instructions
on packaging and shipment method.