Theatre Solution Tier Specifications - Manual

Tier Specifications – Loose Seating
Page 1 of 3
PART 1 – GENERAL
1.1 RELATED DOCUMENTS
A. Drawings and general provisions of the contract, including General and Supplementary Conditions, apply to
this section.
1.2 SUMMARY
A. This section includes the following:
1. Freestanding chairs with hardwood frame and upholstered seat and back cushions.
1.3 SUBMITTALS
A. Product data for each type of product specified.
B. Samples for initial selection purposes in the form of manufacturer’s color charts or samples of materials
showing the full range of standard colors, finishes, and patterns.
1. Fabric
2. Wood finishes.
C. Statement signed by the seating manufacturer confirming that the products submitted comply with the
specified requirements.
1.4 QUALITY ASSURANCE
A. Provide installer’s qualifications confirming the installer is qualified to install the manufacturer’s chairs.
B. Provide seating that complies with California Technical Bulletin 117.
C. Obtain each type of seating, including accessories and mounting components, from a single manufacturer.
1.5 PROJECT CONDITIONS
A. Environmental Conditions: Do not install seating until space is enclosed and weatherproof, wet work in
space is complete and dry, installation of finishes including painting is complete, and ceilings are complete.
Do not install seating until ambient temperature and humidity conditions are continuously maintained at
final occupancy values.
1.6 DELIVERY, STORAGE, AND HANDLING
A. Deliver seating in manufacturer’s unopened cartons clearly labeled with manufacturer’s name and
contents.
B. Handle seating in manner to prevent damage.
1.7 EXTRA MATERIALS
A. Furnish from the same production run as the materials installed. Package materials with protective
covering and identify with labels describing contents.
PART 2 – PRODUCTS
2.1 SEATING
A. Provide from Theatre Solutions, Inc., 121 Park Avenue, Quakertown, PA 18951, the Tier model as follows:
1. Basic freestanding chair.
2. Upholstered seat and back cushions.
3. Hardwood frame with arms.
B. Model noted is based on the Theatre Solutions, Inc. Tier model with the intent of establishing the high level
of quality required for the project. Other brands submitted for approval will be given consideration provided
that a full seating mock-up, along with a complete list of specification discrepancies between the proposed
substitution and the product specified is received at least 10 working days prior to the bid date.
1. By offering a quote for this project, the bidder assumes full responsibility for complying with the
specifications for this project and shall be totally responsible for any expenses incurred if the
product quoted does not comply with the specifications.
C. Failure to comply with the warranty described in Part 4 of these specifications will be cause for
disqualification.