Theatre Solution Lecture Seating Forum - Manual

Forum Lecture Seating Specifications
Page 1 of 5
PART 1 – GENERAL
1.1 RELATED DOCUMENTS
A. Drawings and general provisions of the Contract, including General and Supplementary Conditions, apply
to this section.
1.2 SUMMARY
A. This section includes the following:
1. A complete system of continuous worksurfaces mounted to the floor with integrated support
frames which also support self-returning swivel chairs.
1.3 SUBMITTALS
A. Product data for each type of product specified. Include installation methods.
B. Shop drawings, prepared for architectural drawings and from field dimensions, showing the seating and
table layout, aisle widths as well as a section view with profile dimensions of the seating, tables, and back-
to-back row dimensions.
C. Samples for initial selection purposes in the form of manufacturer’s color charts or samples of materials
showing the full range of standard colors, finishes, and patterns.
1. Fabric
2. Metal Finishes
3. Wood Finishes
D. Statement signed by the lecture seating manufacturer confirming that the products submitted comply with
the specified requirements.
1.4 QUALITY ASSURANCE
A. Provide installer’s qualifications confirming the installer is qualified to install the manufacturer’s chairs
B. Provide seating that complies with California Technical Bulletin 117.
C. Obtain the complete table/seating system, including accessories and mounting components, from a single
manufacturer.
D. Design and install seating with end of table aligning from first to last row. Comply with ADA rules and
regulations.
1.5 PROJECT CONDITIONS
A. Environmental Conditions: Do not install lecture seating and tables until space is enclosed and
weatherproof, wet work in space is complete and dry, installation of finishes including painting is complete,
and ceilings are complete. Do not install lecture seating and tables until ambient temperature and humidity
conditions are continuously maintained at final occupancy values.
1.6 DELIVERY, STORAGE, AND HANDLING
A. Deliver tables and frames in manufacturer’s original wrapping and the seating in manufacturer’s unopened
cartons clearly labeled with manufacturer’s name and contents.
B. Handle seating and tables in manner to prevent damage.
PART 2 – PRODUCTS
2.1 SEATING
A. Provide from Theatre Solutions, Inc., 121 Park Avenue, Quakertown, PA 18951, the Forum Lecture
Seating as follows:
1. Basic floor mounted seat/table supports.
2. Fully-upholstered chair.
3. Plastic laminate worksurfaces with _________ edge.
B. Model noted is based on the Theatre Solutions, Inc. Forum Lecture Seating with the intent of establishing
the high level of quality required for the project. Other brands submitted for approval will be given
consideration provided that a full seating mock-up, along with a complete list of specification discrepancies