OSRAM OPTOTRONIC Constant current LED power supplies with 3DIM - Manual (Page 4)

4
INTRODUCTION
LED technology is changing the world of general lighting. In
luminaire design, however, the various benefi ts of LEDs, e.g.
their high level of fl exibility in operating luminaires, can only
be achieved with perfectly matched control gears. This is fur-
ther complicated by the rapid improvement of the effi cacy
and current capability of LED technologies, which asks for
even greater adaptability of the corresponding control gears.
OPTOTRONIC ® control gears with LEDset interface can meet
this demand for greater adaptability by supporting a wide
power and current range and by their future-proof design,
which makes them ready for coming LED generations.
1. Introduction
Purpose of this application guide:
The purpose of this application guide is to provide basic techni-
cal information on the LEDset interface, focusing on application
solutions that illustrate the specifi c functions of this new inter-
face and show how these can be used. The application solutions
demonstrate that the LEDset interface opens up many opportu-
nities for customizing your LED-based luminaire: the simplicity
and fl exibility of LEDset gives you the freedom to develop new
luminaire system features.