OSRAM OPTOTRONIC Constant current LED power supplies with 3DIM - Manual (Page 13)

13
LEDset APPLICATIONS
The following table shows the output current values obtained by applying
a 1 % resistor (from E96 series unless otherwise specifi ed) for two different
ECGs with a nominal current of 700 mA and 1500 mA, respectively.
Table 4: Current setting by external resistor.
For more information, please see the notes on page 14.
Rset – E96 series
(unless otherwise
specifi ed)
Vset [V] Iout/Inom [%] Inom [mA] = 700 Inom [mA] = 1500
0 0.0 0 0 0
3830 1.0 1 4 8
7500 2.1 12 82 176
11300 3.1 23 163 349
14700 4.0 34 235 505
15000 4.1 35 242 518
19100 5.2 47 329 706
20000 (E24) 5.5 50 348 747
21000 5.8 53 370 792
23200 6.4 60 417 893
25500 7.0 67 466 998
27000 (E24) 7.4 71 498 1066
28000 7.7 74 519 1112
30100 8.2 81 564 1208
34000 9.3 92 647 1386
36500 (E48) 10.0 100 700 1500
38300 > 10.0 100 700 1500
39000 (E24) > 10.0 100 700 1500
40200 (and up to 60000) > 10.0 100 700 1500