SENA Parani-BCD110V3 - Manual (Page 11)

Sena Technologies, Inc 11
2. Getting Started
2.1. Overview
This chapter describes how to connect the Parani-BCD110V3 to the Development Board and
how to confirm that the Parani-BCD110V3 works well by communicating with the Parani-
BCD110V3 by a Terminal Program.
The additional configuration of the Parani-BCD110V3 is explained at the next chapter in detail.
Moreover, the configuration of SPP, Sena I/O Profile and SCO is treated with examples at the
following chapters.
Following steps are taken to ensure the constitution and the operation of the Parani-BCD110V3.
 Go through the package check list.
 Connect the Parani-BCD110V3 to the Development Board according to the panel layout of
the Development Board.
 Connect the power and the serial data cable to the Development Board and confirm the
normal operation.
Following items are pre-required to take steps for ensuring the constitution and the operation of
the Parani-BCD110V3.
 One Development Board (included in the Starter Kit package).
 One DC Power adapter or USB power cable (included in the Starter Kit package).
 One Serial console cable for configuration (included in the Starter Kit package).
 One PC with RS232 serial port.
 Terminal emulation program running on the PC.
2.2. Package Check List
2.2.1. Unit Package
 BCD110SC - Bluetooth embedded OEM module SMD Type, Class 1 w/ chip antenna
 BCD110SU - Bluetooth embedded OEM module SMD Type, Class 1 w/ U.FL connector
 BCD110DC - Bluetooth embedded OEM module DIP Type, Class 1 w/ chip antenna
 BCD110DS - Bluetooth embedded OEM module DIP Type, Class 1 w/ SMA connector
 BCD110DU - Bluetooth embedded OEM module DIP Type, Class 1 w/ U.FL connector
2.2.2. Starter Kit
 BCD110DC 1
 BCD110DS 1
 BCD110DU 1
 Development board 1
 DC Power adapter 1
 RS232 serial cable 1
 Stub antenna 1