SENA ProBee-ZE20S User Manual
Page 68
68
ProBee-ZE20S User Guide Rev.1.10
Range
00000800 - 07FFF800
7.4.2
AT+PANID or AT+PI
Description
Get/Set the 16-bit PAN ID. If it is set to 0s at a coordinator, the coordinator will select a
random 16-bit hexadecimal number as PAN ID. If it is set to 0s at a router/end-device,
the router/end-device will try to join any existing network regardless of PAN ID.
Execute
AT+PANID?
AT+PANID=
Response
OK
OK
Default
0000
Range
0000 – FFFF
7.4.3
AT+EPID or AT+EI
Description
Get/Set the 64-bit extended PAN ID. If the node is a coordinator and the EPID is set to
0s, it will create new extended PAN ID using its 64-bit IEEE address as extended PAN
ID. If the node is a router or end-device and the EPID is set to 0x, it will try to join any
existing network regardless of extended PAN ID.
Execute
AT+EPID?
AT+EPID=
Response
OK
OK
Default
0000000000000000
Range
0000000000000000 - FFFFFFFFFFFFFFFF
7.4.4
AT+GROUPID or AT+GI
Description
Get/Set the 16-bit Group ID. It is used for multicast data reception.
Execute
AT+GROUPID?
AT+GROUPID=
Response
OK
OK
Default
0000
Range
0000 - FFFF
7.4.5
AT+POWER or AT+PW
Description
Get/Set the TX power at which the RF module transmits conducted power.
Execute
AT+POWER?
AT+POWER=
Response
OK
OK
Default
8
Range
-43 - 8