SENA ProBee-ZE20S - Manual (Page 42)

42 ProBee-ZE20S User Guide Rev.1.10
the same rules.
Example)
ATS35=2 # Set broadcast range to all nodes in the network
OK # Response
ATB # Enter the broadcast mode
OK # Response
Send broadcast msg # Put the broadcast message
+++ # Leave data mode
OK # Response
AT+TRANSMITMODE=3 # Set transmission mode to current network
OK # Response
ATZ # Apply to change
OK # Response
Send broadcast msg # Put the broadcast message
+++ # Leave data mode
OK # Response