SENA ProBee-ZE20S User Manual
Page 67
67
ProBee-ZE20S User Guide Rev.1.10
7.3.5
AT+OPPANID or AT+OI
Description
Get the operating 16-bit PAN ID. If PAN ID is set specific value not 0s, operating PAN
ID will equal designated PAN ID. A value of “FFFF” means the device is not joined a
network.
Execute
AT+OPPANID?
Response
OK
7.3.6
AT+OPEPID or AT+OE
Description
Get the operating 64-bit extended PAN ID. A value of “FFFFFFFFFFFFFFFF” means
the device is not joined a network.
Execute
AT+OPEPID?
Response
OK
7.3.7
AT+VERSION or AT+VR
Description
Get firmware version of the module. The firmware version returns a form of “PTvx.x”.
Execute
AT+VERSION?
Response
OK
7.3.8
AT+PRODUCTNAME or AT+PN
Description
Get the product name. It can be used to distinguish among different hardware
platforms.
Execute
AT+PRODUCTNAME?
Response
OK
7.4
Network Specific Parameters
7.4.1
AT+CHMASK or AT+CM
Description
Get/Set the channel mask to use. Bits set as 1 indicate that this particular channel can
be used. Bits set as 0 indicate that this particular channel should not be used. For
example, a channel mask value of 0x00000001 indicates that only channel 0 should be
used. Valid channels range from 11 to 26 inclusive. (16 channels are available.) This
translates to a channel mask value of “0x07FFF800”.
Execute
AT+CHMASK?
AT+CHMASK=
Response
OK
OK
Default
07FFF800