SENA ProBee-ZE20S User Manual

Page 58

ProBee-ZE20S User Guide Rev.1.10

#AT+GPIO11=4 (Set ADC_2 as Analog Input)

#AT+GPIO12=4 (Set ADC_3 as Analog Input)

# Response

6.6.3

Applying

6.6.3.1 Applying and Confirm of Coordinator

The AT commands for Applying and Confirm of Coordinator:

ATZ

# Apply Coordinator Configuration And

# Construct Network

# Response

AT+LONGADDR?

# Confirm Long Address of Coordinator

0001950000001481

# Long Address of Coordinator

# Response

AT+OPCH?

# Confirm Network Channel

# Network Channel

# Response

AT+OPPANID?

# Confirm Network PAN ID

7772

# Network PAN ID

# Response

AT+SHORTADDR?

# Confirm Network Short Addreess of Coordinator

0000

# Network Short Address

# Response

6.6.3.2 Applying and Confirm of Router

The AT commands for Applying and Confirm of Coordinator:

ATZ

# Apply Router Configuration And Construct Network

# Response

AT+LONGADDR?

# Confirm Long Address of Router

0001950000000212

# Long Address of Router

# Response

AT+OPCH?

# Confirm Network Channel

# Network Channel

# Response

AT+OPPANID?

# Confirm Network PAN ID

7772

# Network PAN ID

# Response