SENA ProBee-ZE20S - Manual (Page 3)

3 ProBee-ZE20S User Guide Rev.1.10
Revision Date Name Description
V1.0.0 2011-08-22 HR Zo Initial Writing
V1.0.1 2011-09-29 HR Zo Modification for ZE20S PTv1.4
- Adding AT+RSSI Command
V1.0.2 2011-11.16 HR Zo Modification of errors at 6.1 Development Kit
Contents
V1.5 2012-02-21 Uin Burn Modification for ZE20S PTv1.5
- Modification of the ATS11 and flow control
default value
- Adding ATS71 Register for Frequency Agility
Modification of Key Features about power and
current
Modification of default function at Pin Assign-
ment Table
Modification of Working Distance
Modification of Overview
V1.6 2012-08-20 Uin Burn Modification of Mechanical Drawings.
Modification of ATS55 information.
Modification of some mistypes.
V1.7 2013-04-09 Uin Burn Modification of Analog GPIO information.
Modification of Permit Join and Factory Reset
button information.
- Changes rising edge to falling edge
V1.7.1 2013-07-17 Uin Burn Modification for GPIO_14 pin information.
V1.8 2013-08-28 Uin Burn Modification for ATS36 input range.
Modification for Multicast information.
Modification for Factory_reset button informa-
tion.
V1.9 2013-10-31 Uin Burn Fixed mistype AT+AIO to AT+AI in 5.2.1.
Modification for Multicast information.
V1.10 2014-02-14 Uin Burn Modification for 11.1 Serial Port Pin Outs.
Modification for Analog GPIO return value range
in 5.2.1 and 6.6.7.1.
Modification for 4.1.1 Unicast