2 package check list, 3 product specification – SENA UPSLink100 User Manual
Page 7

7
1.2 Package check list
UPSLink100:
- 110~230 VDC power adaptor
- Serial console cable
- CD-ROM, including software and manuals
1.3 Product specification
Smart UPS with serial data port
3-phase UPS support
User customizable serial protocol and behavior
Real time delivery of UPS alarm via SNMP trap, SNMP notification and Email
Monitor and control the UPS via SNMP, Web and Telnet
UPS
RFC 1628 UPS-MIB fully compliant
RS232 with DB9 female connector
Serial speeds 1200bps to 230Kbps
Flow Control:
None, Hardware RTS/CTS, Software Xon/Xoff
Serial interfaces
Signals:
RS232 Rx, Tx, RTS, CTS, DTR, DSR, DCD, GND
10/100 Base Ethernet with RJ45 Ethernet connector
Network Interface
Supports static and dynamic IP address
Diagnostic LED
Power
Ready
Serial Rx/Tx for serial port
10/100 Base, Link, Act for LAN port
Protocols
ARP, IP/ICMP, TCP, Telnet,
DNS, Dynamic DNS, HTTP, HTTPS,
SMTP, SMTP with Authentication, pop-before SMTP,
DHCP client, NTP, PPPoE,
SNMP v1 & v2c
MIB
MIB II (RFC 1213)
UPS MIB (RFC 1628)
User ID & Password
User-level control with discriminated privileges
HTTPS
Security
IP address filtering
Serial protocol
Web menu
User
customizability
Language (upon request)
Serial console port, Telnet, Web, HelloDevice Manager, SNMP
System logging
Automatic email delivery of system log
To RAM disk or NFS server or syslog server
System statistics
Full-featured system status display
Management
Firmware
Downloadable via Telnet , serial console or Web interface