SENA UPSLink100 - Manual (Page 31)

31
Consequently, the email address set for the device can use an arbitrary username with a registered
hostname (i.e. [email protected] or [email protected]).
The SMTP user name and SMTP user password are required when either SMTP with authentication
or POP-before-SMTP mode is selected.
Figure 0-4 SMTP configuration
4.5 Access control
The UPSLink prevents unauthorized access to the management Web or Telnet service of the UPSLink
by using IP address based filtering method. Disable HTTP and Enable HTTPS for secure web data
transaction. Some users may want to access the management web page without ID and password
authentication. The users can allow one of the following scenarios by changing the parameter
settings :
- Only one host of a specific IP address can access the UPSLink with or without ID and password
- Hosts on a specific subnet can access the UPSLink with or without ID and password
- Any host can access the UPSLink with or without ID and password
- Use secure Web protocol (HTTPS) with or without ID and password
The UPSLink has a private server certificate for temporary use of HTTPS. Users who want to use their
own server certificate may upload new certificate onto the UPSLink only through serial system console.
To upload the new server certificate, connect to the UPSLink’s local system console and select
“2.Network configuration -> 5.Access control -> 7.Upload server certificate” from the menu. See 0
2.3.1 Using system console to learn how to get connected to the local system console of the
UPSLink.