SENA UPSLink100 - Manual (Page 20)

20
The users may navigate between Battery, Input, Output and Bypass group by pressing buttons at the
top of the applet.
Figure 0-5 UPS status gauge – Input
3.5 UPS configuration
UPS parameters are user-configurable on this web page. Among them RFC1628 compliant
parameters can also be set by SNMP-set command. Parameters for Battery Information on Figure 0-6
are noncompliant with RFC1628. The configuration data is stored in volatile area of the UPSLink like
UPS status data. The configuration command is transmitted to the UPS immediately when user clicks
on Apply button. Users have to modify the monitoring application to add user -specific configuration
items on this page.
Figure 0-6 UPS configuration