SENA UPSLink100 - Manual (Page 38)

38
7. System administration
The UPSLink utilizes three user profile types to control accessibility to different functions. These
three levels of user types include: system admin, UPS admin and user.
7.1 User administration
The UPSLink manages three user-level groups. Access to the configuration interfaces is controlled
based on the level of a user’s group.
System Administrator: System Administrator group
- The system administrator group has full read/write access to the UPSLink configurations
including UPS configurations. Only the system admin group has the access to console and
Telnet service.
UPS Administrator: UPS Administrator Group
- The UPS administrator group has full read/write access to most of UPS configuration
parameters. The UPS administrator group has only read access to the other UPSLink
configuration settings and do not have access to UPS monitoring application upload and
configuration menu. Some classified pages will not be shown to this group.
User: General UPS User Group
- The user group has no right to modify any of the UPSLink configuration and the UPS
configuration except language configuration. The user group only has limited read only
access to UPS status and UPSLink configuration. Some classified pages will not be shown
to this group, either.
The factory default user group is system administrator and whose name and password are:
Login: admin Password: admin.
The user groups and their UPSLink access channels are summarized in the Table 0-1.
Group System Administrator UPS Administrator User
Default User name
admin - -
Access via serial
console
O X X
Access via Telnet
O X X
Access via Web O O O
Table 0-1 User groups and their access channels