SENA UPSLink100 User Manual
Page 50
50
4. EEPROM test
5. Ethernet test
----->
Figure 0-2 Hardware test menu within Bootloader Menu Program
When the user selects [Auto test], a test of all the hardware components is performed automatically.
-------------------------------------------------------------------------------
Hardware Test
-------------------------------------------------------------------------------
Select menu
0. Test Mode - One time
1. Auto test
2. DRAM test
3. FLASH test
4. EEPROM test
5. Ethernet test
-----> 1
*******
Hardware auto -detect and auto-test *******
[DRAM]
DRAM Test in progress ----------------------------------------[16384KB]
DRAM Test ----------------------------------------------------[SUCCESS]
[FLASH]
Flash Test Status---------------------------------------------[
100 %]
Flash Test ---------------------------------------------------[SUCCESS]
[EEPROM]
EEPROM
:
A Type exist
EEPROM Test ------------------------------------------------- [SUCCESS]
[Ethernet]
Ethernet chip test--------------------------------------------[SUCCESS]
PING 192.168.14.1 from 192.168.14.7 : 64 bytes of ethernet packet.
64 bytes from 192.168.14.1 : seq=0 ttl=255 timestamp=285068 (ms)
64 bytes from 192.168.14.1 : seq=1 ttl=255 timestamp=286063 (ms)
64 bytes from 192.168.14.1 : seq=2 ttl=255 timestamp=287064 (ms)
64 bytes from 192.168.14.1 : seq=3 ttl=255 timestamp=288065 (ms)
*******
Hardware auto-detect and auto-test
SUMMARY *******
1. DRAM Test
-----------------------------------------------[SUCCESS]
2. FLASH Test -----------------------------------------------[SUCCESS]
3. EEPROM Test-----------------------------------------------[SUCCESS]
4. PING Test
-----------------------------------------------[SUCCESS]
PRESS any key to continue!!
Figure 0-3 Hardware test screen within Bootloader Menu Program
For each hardware component test, the user can skip a test by pressing the
-------------------------------------------------------------------------------
Hardware Test
-------------------------------------------------------------------------------
Select menu
0. Test Mode - One time
1. Auto test
2. DRAM test
3. FLASH test
4. EEPROM test