SENA ProBee-ZE10 User Manual
Page 59

59
ProBee-ZE10 User Guide Rev.1.5
AT+OPCH?
# Confirm Network Channel
20
# Network Channel
OK
# Response
AT+OPPANID?
# Confirm Network PAN ID
7772
# Network PAN ID
OK
# Response
AT+SHORTADDR?
# Confirm Network Short Addreess of Router
9AD6
# Network Short Address
OK
# Response
6.6.4
Queried Sampling
6.6.4.1 Getting Analog Data at Router
The AT commands for Getting Analog Data at Router:
AT+AI?
# Get all the analog data
****,****,2179,0DFE
# Analog Data
# NA, NA, Termerature, Illumination
# (Variable Register 0, 1 are set as they are not available)
# Refer 6.6.7 Data Conversion for Conversion of Analog Data
# to Temperature and Illumination
OK
# Response
AT+AI2?
# Get analog data for temperature
2182
# Analog data for temperature(Refer to 6.6.7 Data Conversion)
OK
# Response
AT+AI3?
# Get analog data for illumination
0BF9
# Analog data for illumination(Refer to 6.6.7)
OK
# Response
6.6.4.2 Getting Analog Data at Coordinator
The AT commands for Getting Analog Data at Coordinator:
AT+REMOTE=0001950000000212,AT+AI?
# Get all the analog data of Router from remote Coordinator
****,****,2194,0DF3
# Analog data of Router
# NA, NA, Temperature, Illumination
# (Variable Register 0, 1 are set as they are not available)
# Refer 6.6.7 Data Conversion for Conversion of Analog Data
# to Temperature and Illumination