SENA ProBee-ZE10 User Manual

Page 58

ProBee-ZE10 User Guide Rev.1.5

AT+NODETYPE=2

# set node type as Router

# Response

AT+PANID=7772

# Set same 16-bit PAN ID (7772) as Coordinator

# Response

AT+GPIO=5550044055550

# Set ADC_2 and ADC_3 as Analog Input

# OR

#AT+GPIO5=4 (Set ADC_2 as Analog Input)

#AT+GPIO6=4 (Set ADC_3 as Analog Input)

# Response

6.6.3

Applying

6.6.3.1

Applying and Confirm of Coordinator

The AT commands for Applying and Confirm of Coordinator:

ATZ

# Apply Coordinator Configuration And

# Construct Network

# Response

AT+LONGADDR?

# Confirm Long Address of Coordinator

0001950000001481

# Long Address of Coordinator

# Response

AT+OPCH?

# Confirm Network Channel

# Network Channel

# Response

AT+OPPANID?

# Confirm Network PAN ID

7772

# Network PAN ID

# Response

AT+SHORTADDR?

# Confirm Network Short Addreess of Coordinator

0000

# Network Short Address

# Response

6.6.3.2

Applying and Confirm of Router

The AT commands for Applying and Confirm of Coordinator:

ATZ

# Apply Router Configuration And Construct Network

# Response

AT+LONGADDR?

# Confirm Long Address of Router

0001950000000212

# Long Address of Router

# Response