Powersolve WM Series - Manual (Page 3)

Powersolve Electronics Ltd. 8A Arnhem Road, Newbury, RG14 5RU. England
Tel: 01635 521858 Fax: 01635 523771 Email: [email protected]
www.powersolve.co.uk
Uninterruptible Power Supplies
Option Card & REPO Details
Xi S Option Card
The Xi S card provides network connectivity and SNMP
management protocol capability to the WM series of UPS.
Supplied with the option card is a CD which contains all
relevant software including the Manual and MIB.
The card can be factory fitted with this option on request
- please contact sales for assistance
Xi V Option Card
The Xi V card provides true volt free contact indication of the
following key parameters:
Mains Fail
Battery Low
Bypass
UPS Fault
These are 250VAC 2A rated contacts.
REPO (Remote Emergency Power Off)
The REPO feature shuts down the protected equipment
immediately and does not follow the orderly shutdown
procedure initiated by any power management software.
This occurs when the link between pin 1 and 2 is broken.
Any devices which are operating on battery are also
shutdown immediately. When the REPO switch is closed, the
equipment will not return to battery power until the UPS input
is re-cycled.
This can be done by shutting down the UPS and re-starting it.
Xi S Box Contents
Xi V Box Contents