Sample application, Application, Application area – Powersolve UMS Series User Manual
Page 3
Powersolve Electronics Ltd., Unit 8A Arnhem Road, Newbury RG14 5RU, United Kingdom
Tel 0044 (0)1635 521858 Fax 0044 (0)1635 523771
(Subject to alterations. This product is not designed to be used in applications such as life support systems wherein a failure
Application Notes
Many tasks formerly performed by electromagnetic
relays can now be in solution Camtec new UMS
electronic semiconductor relay. In comparison to a
mechanic relay the UMS features no
The UMS Power Switch is a full semiconductor relay
with built in controller. Based
construction the power switch provides
Mio. switch-loops at full load.
conditions a very good power relay
mostly feature around 10000 switch
corrosion and aging pass to the device
operating range provides earlier derating above 45°C
Our UMS works with no derating up to 60°C ambient
temperature and although provides
loops lifetime.
If your desideratum exceeds 120Vdc and 320A surge
current just connect some UMS in parallel
There is no external circuit recommended.
Advantages of the UMS100:
no mechanical wear
no electromagnetic influences
no high-frequency distortions
no acoustic distortions
inured to high stress peaks
no contact chatter
extreme fast signal activation
built in controller provides active monitoring
all operation status
Sample application:
Sample: UMS with Camtec programmable
HSEUreg- & HSEUIreg-series, used
Powersolve Electronics Ltd., Unit 8A Arnhem Road, Newbury RG14 5RU, United Kingdom
Fax 0044 (0)1635 523771
www.powersolve.co.uk
alterations. This product is not designed to be used in applications such as life support systems wherein a failure or malfunction could result in injury or death)
formerly performed by electromagnetic
Camtec new UMS
electronic semiconductor relay. In comparison to a
features no locomotive parts.
he UMS Power Switch is a full semiconductor relay
on its wear-free
construction the power switch provides more than 100
. Under the same
relay is guaranteed to
10000 switch-loops before
corrosion and aging pass to the device. The coil
operating range provides earlier derating above 45°C.
ur UMS works with no derating up to 60°C ambient
temperature and although provides 100 Mio. switch-
120Vdc and 320A surge
current just connect some UMS in parallel or in series.
There is no external circuit recommended.
no electromagnetic influences
frequency distortions
extreme fast signal activation
active monitoring of
Future-proof and flexible
The intelligent UMS executes different control and
regulation feedings. Industrial control units open a wide
field of applications to the power switch. For example
new generation dc-drives increased standards are
recommended. The testing of dc
extreme conditions and presetting. Therefore special
test units are the standard use. The UMS with its
variable impedance matching offers the most suitable
choice of demand.
Power Crash Control (PCC)
The UMS features a special
control so that in switch
direction changes) no shortcut occurs (Power Crash
Control). The turn-over of the sense control works
automatically. All control inputs and outputs are
galvanic insulated by photo couplers.
Special features list:
big screw terminals for up to 4AWG cabling
featuring up to 120Vdc and 80A with a 320A
surge current
MOSFET outputs offer an
If you need more power
to be connected in parallel or in series
programmable
, used in a dc-motor-drive.
Application
DC
valve control systems
magnetic
feeder control systems
brake systems
battery
Powersolve Electronics Ltd., Unit 8A Arnhem Road, Newbury RG14 5RU, United Kingdom
p.3/3 03.12B
or malfunction could result in injury or death)
proof and flexible
The intelligent UMS executes different control and
regulation feedings. Industrial control units open a wide
field of applications to the power switch. For example
drives increased standards are
recommended. The testing of dc-drives works under
conditions and presetting. Therefore special
test units are the standard use. The UMS with its
variable impedance matching offers the most suitable
(PCC)
special temperature and a voltage
control so that in switch over mode (e.g. rotating
direction changes) no shortcut occurs (Power Crash
over of the sense control works
automatically. All control inputs and outputs are
galvanic insulated by photo couplers.
big screw terminals for up to 4AWG cabling
120Vdc and 80A with a 320A
MOSFET outputs offer an extreme low RDSon
If you need more power – the UMS is designed
to be connected in parallel or in series
Application Area
DC motor drives
valve control systems
magnetic coil
feeder control systems
brake systems
battery backup systems