Powersolve ES300 Series - Manual (Page 3)

ES030-10
Rev. Sept. 2012 SPECIFICATIONS Page 1 - 3
Typ i cal Ap pli ca tions
• Test and measurement • Component device testing
• Controlled battery charging • ATE in industrial production lines • Medical research equipment
• Electronic Circuit Development • Laboratory analysis • Accurate current sources
Avail able Op tions
In creased Out put
Power
The conservatively rated unit
allows to deliver extra output
with the same reliability.
At some derating, either the maximum output
voltage or the maximum output current can be
increased by about 10%.
• Order Code - P069
High Volt age Iso la tion
A higher output isolation
allows series operation
up to 1000V.
• Order Code - P089
Se quencer
Arbitrary Waveform generator
or standalone automation.
The sequencer is integrated
in the Ethernet controller.
• Order Code - P 179
Rear Power Out put and
Re mote Sensing
Output terminals at the rear
panel instead of bind posts
at the front panel, includes
remote sensing.
• Order Code - P185
Soft ware con trol
and In ter faces
Factory installed programming
interfaces:
• Ethernet controller (incl.sequencer) - P179
• RS232 controller - P180
• PROFIBUS controller - P281
• CANBUS controller - P282
External programming interface modules :
• IEEE488 controller module
• ISO AMP module
19" Rack
Mount ing Adapter
Using the 19" mounting
adapters, its possible to
position the ES units in a
19" rack. Several configurations possible
with multiple ES and / or PSC or ISO AMP
modules.