Powersolve PPS120P Series User Manual
Ac-dc converters
Powersolve Electronics Ltd. Units 8A, Arnhem Road, Newbury, RG14 5RU. England
Tel:01635 521858 Fax: 01635 523771 Email: [email protected]
www.powersolve.co.uk
AC-DC Converters
PPS120P Series
90/120 Watts
Single, Dual, Triple & Quad Outputs
Features
•
Active power factor correction
•
IEC EN61000-3-2 (D) compliance
•
Universal input
•
Built-in EMI filter
•
UL/cUL, TUV safety approved
•
Optional cover
INPUT
Input range
90~264 VAC, universal
Frequency
47~63Hz
Inrush current
38A typical, Cold start @ 25°C, 115 VAC
Efficiency
65%~85% typical at full load
EMI filter
FCC part 15 Class B, CISPR 22/EN55022 Class B
Power factor
>0.97@115 VAC
>0.95@230 VAC Typ.
OUTPUT
Max. power
90W convection, 120W with 30CFM forced air
Line Regulation
±0.5%
Load Regulation
Main Output +3%, Aux. Outputs +5% Typ.
Cross Regulation
Main Output +5%, Aux. Outputs +10% Typ.
Hold-up Time
16mS Typ. at full load, 115 VAC
Noise & Ripple
1% Typ.
Over Voltage Protection
latch-off
Overload Protection
auto-recovery
Short Circuit Protection
auto-recovery
Output adjust
output 1 ±10%
ENVIRONMENTAL
Operating temperature
0°C to 50°C ambient, derate each output at 2.5% per degree from 50°C to 70°C
Storage temperature
-40°C to 85°C
Electromagnetic susceptibility
meet IEC 801-2,-3,-4,-5 Level 3
Humidity
Operating, non-condensing 5% to 95%
Vibration
10 to 55Hz at 1G, 3 minutes period, 30 minutes along X,Y and Z axis
Temperature coefficient
+0.05% per degree C
MTBF demonstration
>100,000 hours at 25°C
Safety approvals
UL1950/cUL, TUV EN60950
Electrical Specification