Sena Bluetooth SMH10R v4.3 User's Guide - Manual (Page 6)

SMH10R
6
• Velcro Pads for Main Unit
• Double Sided Adhesive Tapes for Main Unit
• Microphone Sponges
• USB Power & Data Cable
• Cigarette Charger
You can purchase an additional
battery pack for replacement.
* Optional Accessory - Battery pack (SC-A0301)
3. INSTALLING THE SMH10R ON YOUR HELMET
To securely install the main unit of the SMH10R, you can use
the velcro pad or double sided adhesive tape. Please follow the
procedure below.
1. Peel off the cover of the adhesive tape of the velcro pad and
attach it on the back plate of the main unit.
2. Locate a suitable surface on your helmet to attach the unit, clean
the location with a moistened towel, and allow to dry thoroughly.
3. Peel off the cover of the adhesive tape on the velcro pad and
attach the pad on the left side of your helmet.