Sena Bluetooth SMH10R v4.3 User's Guide - Manual (Page 14)

SMH10R
14
Level 5 is the highest sensitivity setting and 1 the lowest. After you
have completed the setting, tap the Center Button to apply the
changes.
6.9 Enabling/Disabling Voice Prompts
Voice Prompt “Voice prompt”
Factory Default Enable
Enable / Disable Tap the Center Button
You can disable voice prompts by configuration setting, but the
following voice prompts are always on.
- Voice prompts for configuration setting menu
- Voice prompts for battery level Indicator
- Voice prompts for factory reset
6.10 Delete All Bluetooth Pairing Information
Voice Prompt “Delete all pairings”
Factory Default N/A
Enable / Disable Tap the Center Button
To delete all Bluetooth pairing information on the SMH10R, tap the
(+) Button or the (-) Button until you hear the voice prompt, “Delete
all pairings”. Tap the Center Button to confirm.
6.11 Reset to Factory Default Setting
Voice Prompt “Factory reset”
Factory Default N/A
Execute Tap the Center Button
To restore factory default settings on the SMH10R, tap the (+)
Button or the (-) Button until you hear the voice prompt, “Factory
reset”. Tap the Center Button to confirm. The SMH10R powers off
with a voice prompt, “Headset reset, goodbye”.
6.12 Exit Voice Configuration Menu
Voice Prompt “Exit configuration”
Factory Default N/A
Execute Tap the Center Button
To exit voice configuration menu and get back to stand-by mode,
tap the (+) Button or the (-) Button until you hear the voice prompt,
“Exit configuration”. Tap the Center Button to confirm.