Sena Bluetooth SMH10R v4.3 User's Guide User Manual
Page 16
SMH10R
16
7.1 Mobile Phone Pairing
1. To enter the voice configuration menu, press and hold the
Center Button for 10 seconds until you hear the voice prompt,
“Configuration menu”.
2. By tapping the (+) Button, you will hear the voice prompt,
“Phone pairing”.
3. Search for a Bluetooth device on your mobile phone. Select
Sena SMH10R in the list of devices detected on the mobile
phone.
4. Enter 0000 for the PIN. Some mobile phones may not ask for a
PIN.
5. The mobile phone confirms that pairing has completed and the
SMH10R is ready to use. You will hear the voice prompt, “Your
headset is paired”.
6. If the pairing process is not completed within three minutes, the
SMH10R will return to stand-by mode.
7.2 Multipoint Pairing
Typical Bluetooth headsets can connect with only one HFP (Hands-
Free Profile) device, but multipoint pairing allows the headset to
connect with two HFP devices at the same time. So, when you
already have a mobile phone connected with the SMH10R, you
can also pair and connect a second mobile phone or other HFP
device such as GPS or the Sena SR10, Bluetooth adapter.
1. To enter the voice configuration menu, press and hold the
Center Button for 10 seconds until you hear the voice prompt,
“Configuration menu”.
2. Double tap the (+) Button then you will hear the voice prompt,
“Multipoint pairing”.
3. If you want to pair a second mobile phone, search for the
Bluetooth device on your mobile phone, and select Sena
SMH10R in the list of devices detected on the mobile phone.
4. Enter 0000 for the PIN. Some mobile phones may not ask for
the PIN.
5. The mobile phone confirms that pairing has completed and the
SMH10R is ready to use. You will hear the voice prompt, “Your
headset is paired”.
6. If you want to pair a GPS by multipoint pairing, search for the
Bluetooth device on the GPS screen, and select Sena SMH10R
at step 3. Please refer to the section “7.4.1 Multipoint GPS
Pairing” for more details.
7. If you want to pair the Sena SR10, Bluetooth adapter, please
refer to the section “7.5 Pairing with the Sena SR10, Bluetooth
Two-way Radio Adapter".