Sena Bluetooth SMH10R v4.3 User's Guide - Manual (Page 11)

English
SMH10R
11
The voice prompt for each menu item is as follows:
(1) Phone pairing
(2) Multipoint pairing
(3) Phone selective pairing
(4) Media selective pairing
(5) Speed dial
(6) VOX phone
(7) VOX intercom
(8) VOX sensitivity
(9) Voice prompt
(10) Delete all pairings
(11) Factory reset
(12) Exit configuration
Phone pairing Exit configuration
Multipoint pairing Factory reset
Phone selective pairing Delete all pairings
Media Selective pairing Voice prompt
Speed Dial
VOX phone
VOX sensitivity
VOX intercom
6.1 Mobile Phone Pairing
Voice Prompt “Phone pairing”
Factory Default N/A
To go into mobile phone pairing mode, tap the (+) Button or the (-)
Button until you hear the voice prompt, “Phone pairing”. Please
refer to section 7.1 for details on mobile phone pairing. If you tap
the (+) or the (-) Button, you can exit from the phone pairing mode.
6.2 Multipoint Pairing
Voice Prompt “Multipoint pairing”
Factory Default N/A
To go into multipoint pairing mode, tap the (+) Button or the (-)
Button until you hear the voice prompt, “Multipoint pairing”. Please
refer to section 7.2 for details on multipoint pairing. If you tap the
(+) or the (-) Button, you can exit from the multipoint pairing mode.