Sena Bluetooth SMH10R v4.3 User's Guide - Manual (Page 17)

English
SMH10R
17
7.3 Bluetooth Stereo Device Pairing
If the Bluetooth stereo device is integrated with a mobile phone
such as a smartphone, you don’t need to pair the SMH10R with it
separately. When the SMH10R is paired with the mobile phone, it
is also paired as a stereo music device.
If you have a stand alone Bluetooth stereo device, follow the
pairing procedure separately. The procedure is the same as the
procedure given in “7.1 Mobile Phone Pairing”.
Note:
1. If a Bluetooth connection between the headset and a mobile phone is
disconnected, press the Center Button for 3 seconds until you hear a
high tone single beep to recover the Bluetooth connection immediately.
2. If a Bluetooth connection between the headset and a media player
is disconnected, press the Center Button for 1 second to recover the
Bluetooth connection and play.
7.4 Bluetooth GPS Navigation Pairing
You can listen to voice instruction from Bluetooth GPS navigation.
Some GPS systems use a mobile phone profile (HFP, Hands-Free
Profile) and others use a stereo music profile (A2DP, Advanced
Audio Distribution Profile). Most motorcycle specific GPS systems
use a mobile phone profile for turn-by-turn voice instruction. You
can simultaneously use a mobile phone and a GPS which uses a
mobile phone profile by one of the following procedures.
7.4.1 Multipoint GPS Pairing
If you use GPS only for turn-by-turn voice instructions, not
for Bluetooth stereo music streaming, multipoint pairing is
recommended for the GPS connection. Multipoint Bluetooth pairing
allows the SMH10R to connect two HFP devices at the same time:
mobile phone and GPS navigation. Follow the steps below to pair
the GPS using multipoint pairing.
1. To enter the voice configuration menu, press and hold the
Center Button for 10 seconds until you hear the voice prompt,
“Configuration menu”.
2. Tap the (+) Button and you will hear the voice prompt, “Phone
pairing”.
3. Search for Bluetooth devices on the GPS navigation screen.
Select Sena SMH10R in the list of devices detected on the GPS.
4. Enter 0000 for the PIN.