Fault reset …………………………………………………………………………………………… 34, Fault reset, Firmware upgrade – Sena Bluetooth SMH10R v4.3 User's Guide User Manual
Page 34
SMH10R
34
20. FAULT RESET
When the SMH10R is not working properly or is faulty for any
reason, you may reset it by pushing the pin-hole reset button at the
front of the headset main unit. Insert a paper clip into the reset pin-
hole and press the reset button for a second using light pressure.
The SMH10R will be switched off, and you have to turn the system
back on and try again. However, this will not restore the headset to
the factory default settings.
21. FIRMWARE UPGRADE
The SMH10R supports a firmware upgrade function. Please visit
the Sena Bluetooth web site at o
check the latest software downloads.