Peerless-AV GC-X360S-W - Installation - Manual (Page 6)

6 date:01/22/13 #:125-9401
1a-2
1a-1
Use stud finder to locate and mark stud
center lines.
Level cover plate. Mark mounting holes
on stud center lines.
When installing Peerless wall mounts on a wood stud wall covered with gypsum board (drywall), verify that the
woods studs are a minimum of 2”X4” nominal size. When installing to more than one stud, insure the spacing
between studs is at least 16” but does not exceed 24”. Do not install over gypsum board thicker than 5/8”.
WARNING
1a