Peerless-AV GC-X360S-W - Installation - Manual (Page 11)

11 date:01/22/13 #:125-9401
1d-1
TIGHTENING
SLOPE NUT
F
5/8" OPEN BOX WRENCH
TIGHTENING
SLOPE NUT
B
B
B
J
F
F
F
BOTTOM OF DESK
BOTTOM OF DESK
NOTE: Avoid jamming both slope nuts (F) together,
doing so may make it difficult to remove slope nut
used for tightening.
After slope nut is secure remove bottom slope nut.
LEAVE SPACE
IN BETWEEN
SLOPE NUTS
Level cover plate and mark the center of four
rectangular mounting holes
5/16"
(8 mm)
Drill four 5/16” (8 mm) dia. holes through desktop
ounting surface