B&B Electronics SL2736-698 - Manual - Manual (Page 8)

November 2011 940-0194-100 8
WARNING! DO NOT insert the card upside down or shove the card in too hard. Damage may occur!
When properly inserted, the card will be fully contained within the slot, with only the connector and
cable protruding.
Note: To remove the card, press your device’s card eject button, if available, then remove slowly.
Hi-Speed COM Tools
Hi-Speed COM Tools is a powerful utility that allows you to use higher baud rates with serial applications designed
for lower speeds. Advanced users can also configure custom baud rates and modify flow control properties. The
handy utility also reports your COM port number.
This section explains how to do the following:
Start Hi-Speed COM Tools
View COM port assignment
Determine the maximum baud rate of your card
Map baud rates
Use advanced options
Start Hi-Speed COM Tools
Tap Start | Settings | Connections tab | Hi-Speed COM Tools.
Note: If the Hi-Speed COM Tools icon does not appear, soft reset your device by pressing the reset button.
View COM Port Assignment