B&B Electronics 858-18121 - Manual - Manual (Page 32)

28
The following functions can be performed via iView 2 :
Function Description
Unit Configuration Display/modify unit information
Port Configuration Display/modify port data
Bandwidth Displays settings for Bandwidth configuration
Tables Display statistics tables, including Unit and Port tables, RMON
statistics, MIB-II ifTable and SFP Info.
VLAN Provides configuration for VLAN IDs per port
Advanced Reboot the module; also allows boot trap delay
OAM AH Configure passive and active 802.3ah
OAM CFM Perform administrative configuration functions
Agent Info Displays SNMP agent data
Unit Configuration
Select Unit Configuration to display/modify unit information including IP address (display
only, modification not allowed), global flow control, maximum frame size and OAMPDU:
NOTE
Entering a descriptor in the Description field can make it easier to track down the source of a
Trap.