B&B Electronics 858-18121 - Manual - Manual (Page 31)

27
Using iView 2
iView² is IMC Networks’ management software, providing network management in
an easy to use GUI. Once iView² is installed on a network management PC using a
Windows operating system, use the Start menu to access iView².
NOTE
Windows SNMP services must be installed to receive traps.
The autoscan feature of iView² will detect IMC Network devices on an active subnet
and list them in the network outline. Click the connection for the IE-iMcV-MultiWay
to open its iView² screen. To perform additional configuration, select the iView
2
iConfig view icon on the toolbar in iView². This allows a session to be launched, and
the default password/username is admin/admin. Additional private usernames and
passwords can be entered in the USERS tab. If the list of passwords is not
maintained, the usernames and passwords can be reset by opening a CLI session and
typing in the cleandb command. This will reset all but the IP address of the device.