B&B Electronics 858-18121 - Manual - Manual (Page 28)

24
Viewing SFP Statistics (sfpstats)
To view SFP statistics on the IE-iMcV-MultiWay, enter sfpstats. This will open a
screen displaying SFP information, including vendor, serial number, bit rate and other
options.
Pressing the Space Bar will refresh the data on the screen.
Unit
Advertise FlowC and Force FlowCtrl - This is the FlowControl feature.
• When using FlowControl functionality on any port, enable Global FlowControl.
Then, configure each port individually.
• When using Auto Negotiation and FlowControl, set Advertise FlowC to Advertise
Flow and set Force FlowCtrl to Flow Auto.
• Set Advertise FlowC to No Flow to disable FlowControl on a given port.
• When using FlowControl and Force Mode on a given port, set Advertise FlowC
to Advertise Flow and set Force FlowCtrl to Frc FlowCt.
Unit FlowControl This enables/disables FlowControl functionality on the unit and
must be enabled for FlowControl to function on any port.