B&B Electronics 858-18121 - Manual User Manual

Page 30

Text mode
Original mode

The Port screen contains the following commands:

Port Enable

Enable/Disable the port. (Select Enable to enable the port.)

Admin Status

Set Administration level. (Select UP to enable management
through the port.)
Both settings must be enabled to enable the port.

Port Speed Ctrl

Set the port manually or for Auto Negotiation.

Advertise Ctrl

This is the Selective Advertising feature. Selective Advertising,
when used in combination with Auto Negotiation, advertises the
configured speed and duplex mode for the twisted pair ports.
Auto Negotiation must be enabled for Selective Advertising.

NOTE

Selective Advertising must be used when connecting to a device that auto negotiates and a
specific speed and duplex mode is desired.