B&B Electronics USR604 - Manual - Manual (Page 39)

Section 8 - Appendix
Page 39 of 45 Document Number: USR60x-0812m
www.bb-elec.com/
www.bb-europe.com/
Appendix
7 In This Section
Loopback Test ..........................................................
Serial Port Wiring ......................................................
Loopback Test
To verify the operation of the USB to serial converter perform a
loopback test using the following procedure:
1. Connect the converter to the PC with a USB cable and install the
driver using the procedure provided in the Software Installation (on
page 13) section of this manual.
2. On the PC open HyperTerminal (found in the Program files under
Accessories / Communications).
Figure 23: Hyperterminal Connection Name
S
ECTION
8