B&B Electronics USR604 - Manual - Manual (Page 33)

Section 7 - Specifications
Page 33 of 45 Document Number: USR60x-0812m
www.bb-elec.com/
www.bb-europe.com/
Certifications
Category Specification
Emissions FCC Class B, CISPR Class B (EN55022)
CE EN61000-6-2:2005 – Heavy Industrial
EN61000-4-2:2008 – (ESD) ±8kV contact, ±15kV air
EN61000-4-3:2006 – (RI) 10V/m, 80 to 1000 MHz; 3 V/m, 1.3 to 2.7 GHz
EN61000-4-4:2004 – (EFT Burst) ±2kV DC ports; ±1kV signal ports
EN61000-4-5:2005 – (Surge) ±1kV Signal Ports
EN61000-4-6:2005 – (CI) 10 VRMS , 0.15 to 80 MHz
EN61000-4-8:2001 – (Magnetic) 10A/m, 50 Hz and 60 Hz
Shock IEC60068-2-27 – 50G peak, 11ms, 3 axis
Vibration IEC60068-2-6 – 10 to 500 Hz, 4G, 3 axis
Freefall (drop) IEC60068-2-32 – 10 total drops from sides, corner and edges; 1M
Information – FCC rules
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference that may cause undesired operation.
Information – UL Class 1 Div 2
Suitable for use in Class 1, Division 2, Groups A, B, C and D Hazardous Locations, or Nonhazardous locations
only.
WARNING - EXPLOSION HAZARD – DO NOT DISCONNECT EQUIPMENT WHILE THE CIRCUIT IS LIVE
UNLESS THE AREA IS KNOWN TO BE FREE OF IGNITABLE CONCENTRATIONS.
Install in accordance with control drawing number 9340R0.
Ind. Cont. Eq.
For HAZ LOC
3HTV
E245458
Class I, Div. 2, Groups A, B, C & D
Temp. Code: T4A