B&B Electronics USR604 - Manual - Manual (Page 13)

Section 4 - Software Installation
Page 13 of 45 Document Number: USR60x-0812m
www.bb-elec.com/
www.bb-europe.com/
Software Installation
3 In This Section
Installing the Driver ...................................................
Un-Installing the Driver ..............................................
.
Do not connect the converter to your PC until the Driver is
installed. The driver is contained on the CD included with the
converter. It is installed using an executable program. This program
must be run on your PC before connecting the converter to your USB
port.
Installing the Driver
Insert the CD into your CD ROM Drive. The driver installation software
should automatically start. If not, browse the CD and double click on
the “setup.exe” file. The following dialog box will appear.
Figure 2: Run setup.exe dialog
S
ECTION
4